Model SAL
Special design that includes the "limit-load" feature, without exceeding horse power limits when pumping.Directly connected electric motor as part of the standard specifications, making its operation stable.
Main frame and impeller are made using a special cast iron, increasing resistance to abrasion.
Leakage to the ground is reduced by using a reinforced pump outvane.
| liquid electrolyte | Slurry containing granules | |
|---|---|---|
| Temperature | 0 ~ 80 ℃ | |
| Density | 1.1kg / ℓ | |
| Allowable pushing pressure | 0.1MPa | |
| structure | Impeller | semi-open |
| Shaft seal | grand packing | |
| Bearing | sealed ball bearings, ball bearings (oil bath) | |
| material | Casing | chromium cast iron / two-phase stainless |
| Impeller | high chromium cast iron / two-phase stainless | |
| Main shaft | SUS403 (EFG type), S35C (HJ type) | |
| Flange | JIS10K equivalent | |
| liquid electrolyte | Slurry containing granules | |
|---|---|---|
| Temperature | 0 ~ 80 ℃ | |
| Density | 1.1kg / ℓ | |
| Allowable pushing pressure | 0.1MPa | |
| structure | Impeller | semi-open |
| Shaft seal | grand packing | |
| Bearing | sealed ball bearings, ball bearings (oil bath) | |
| material | Casing | chromium cast iron / two-phase stainless |
| Impeller | high chromium cast iron / two-phase stainless | |
| Main shaft | SUS403 (EFG type), S35C (HJ type) | |
| Flange | JIS10K equivalent | |