Model ULP
(1) Prevents clogging by and entanglement of fibers.
(2) Since a booster impeller (special specifications) is used, the pump can be used for up to 6 % pulp liquid.
■Standard Specifications.
| Liquid | 5% below pulp liquid(0～95℃) | |||||
| Allowable suction pressure | 0.3MPa｛3kgf/㎠｝*1 | |||||
| Max. working pressure | 0.68～1.27MPa｛7～13kgf/㎠｝ | |||||
| Construction | Impeller | Full-open type | ||||
| Shaft seal | Gland packing | |||||
| Flushing | External flushing | |||||
| Bearing | Ball baring/Oil bath | |||||
| Flange | JIS10K RF | |||||
| Materials | Main stainless type | Stainless type | ||||
| Casing | FC200 | SCS13 | ||||
| Impeller | SCS13 | SCS13 | ||||
| Shaft | SUS304 | SUS304 | ||||
| Shaft sleeve | SUS304 | SUS304 | ||||
*1. At the maximum operating pressure or lower.
■Optional Specifications
| Liquid | Pulp density between 5.1% and 6% with booster impeller | |||||
| Construction | Gland packing | |||||
| PTFE | ||||||
| Mechanical seal | ||||||
| Coupling rubflex type*1 | ||||||
| Materials | Shaft sleeve: SUS304 coating processed | |||||
*1. Toyo Rubbflex Couplings are made by Toyo Tire & Rubber Co., Ltd.