Seika sensor

Seika sensor

Model  Measuring range Resolution
B1, B2, B3 ±3g, ±10g, ±50g ( 1g = 9.81ms-2 ) <0.001g, <0.005g, <0.01g
Dynamic Accelerometers (lower cut-off frequency = 1 or 10 Hz)

Model Measuring range Resolution Frequenzy range
BDK3 ± 3 g  < 10-3 g  1...300 Hz
BDK10 ± 10 g  < 5*10-3 g  1... 800 Hz
BDK100 ± 100 g  < 1*10-2 g  1... 1.5 kHz
Inclinometers

Model Measuring range Resolution
NB3 ±10° (±20°)  <0.001°
NA2-05, NA2-10
NA3-30

NA4-45, NA4-70

±5°, ±10°
±30°

±45°, ±70°

<0.001Grad, <0.002Grad
<0.005Grad

<0.01Grad, <0.01Grad

N2, N3, N4 ±10°, ±30°, ±70°  <0.001°, <0.005°, <0.005°
NG2, NG3, NG4 ±10°, ±30°, ±80°  <0.001°, <0.005°, <0.005°
NG...I Inclinometer type NG2, NG3, NG4 with integrated 4...20mA signal conditioner
NG...U  Inclinometer type NG2, NG3, NG4 with integrated 0...5V signal conditioner
NG360  Inclinometer with 360° measuring range and integrated microprocessor and RS485 interface
Sensor boxes (for harsh operating conditions)

Model  Features
SB1I Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any type and one integrated signal conditioner with 4...20mA output.
SB2I Sensor box (98 x 64 x 56mm3) with two integrated SEIKA sensors of type B, BD, BDK, N or NB and two integrated signal conditioners with a 4...20mA output each. Both channels are electrically isolated from each other.
SB1U Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any type and one integrated signal conditioner with 0...5V output.
SB1S Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any type, one integrated signal conditioner with 0...5V output and two open collector switch outputs that respond to traversing of adjustable thresholds.
SBS1U Sensor box (98 x 64 x 56mm3) with one integrated SEIKA-Servo-Inclinometer for measuring small angles of up to 2 degrees with very high resolution and an integrated signal conditioner with 0...5V output.
SB360 Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of type NG360, internal microprocessor and RS485 interface.
SBG2U Sensor box (124 x 80 x 58mm3) with two integrated SEIKA sensors of type NG and two 0...5V outputs.
SBG3I Sensor box (124 x 80 x 58mm3) with three integrated SEIKA sensors and three integrated signal conditioners with 4...20mA output.
SBL1 Sensor box (180 x 180 x 100mm3 - large and robust) with one integrated SEIKA sensor of any type and one integrated signal conditioner with 4...20mA output.
SBL1S Sensor box (180 x 180 x 100mm3 - large and robust) with two integrated SEIKA sensors of any type, one integrated signal conditioner with 4...20mA output, one integrated signal conditioner with 0...5V output and two safety relays that respond to traversing of adjustable thresholds. The SBL1S has two redundant, electrically isolated measuring channels for safety related applications.
XB.. Extra robust, pressure-, saltwater- and corrosion-proof stainless steel sensor box (ø120 x 50) as an alternative to the SB.. housings (180 x 180 x 100mm3) for especially harsh operating conditions, aggressive fluids and saltwater.
SC485B Box (63.5 x 58 x 35mm3) with RS485/RS232 converter for operation of inclinometers NG360, SB360, and XB360 from a RS232 port.
Sensor accessories

Model Features
NV4a Filtering signal conditioner for sensor signal matching with symmetrical +/- 4 V voltage output
NV6a Filtering signal conditioner for sensor signal matching to a 4...20mA, 2-wire interface
NV8a Filtering signal conditioner for sensor signal matching with an asymmetric 0...5V output voltage
SW3 Sensor cube for multiaxial arrangement of SEIKA accelerometers and/or SEIKA inclinometers
SBBS, SBBB, SBBW Fixing plates from stainless steel for sensor boxes SB..